Technology is genuinely marvelous. It makes our lives more convenient and helps us save a ton of time.
The best technology includes TVs, dishwashers, ACs, heaters, HVAC systems, and, of course, washing machines.
Washing machines are a boon to our existence. They do away with the hassle of having to wash clothes pretty neatly.
However, it’s a nightmare when your washing machine suddenly stops working. A nasty spinner in your machine can ruin your daily routine.
However, if you own an LG washing machine, we may be able to help.
Even though we don’t know the intricacies of LG washing machine repair like professionals do, we can help you out with fixing a lousy spinner.
Today we’ll look into the top causes of spinner failure, how to fix them, and how to open an LG Washing machine spinner.
How to Repair Lg Washing Machine Spinner?
Knowing why your spinner is malfunctioning is the key to learning how to repair an LG washing machine spinner.
Thus, let’s look at the top reasons for failure and discover the solutions.
The components inside your LG washing machine are connected via wires. These wires are essential for supplying commands and power to each independent part your spinner relies on.
While parts like the light speed sensor use single-wire connectivity, more complex components like the motor are controlled by a bunch of wires fitted into a harness.
Over time, the resilience of these wires keeps depleting. The consistent use, wear and tear, and load pressure affect them significantly.
The impact of it all can cause the wires to snap or come loose. Additionally, the constant vibration of the machine also causes your washing machine to lose its sturdiness over time.
When the wires in your spinner break, essential components lose their functionality, causing your spinner to malfunction.
How to Repair?
In such a situation, there are two scenarios that you’ll face. The first one is where the wires have come loose.
In this instance, you just have to put them back in place. However, your wires may also break. In this situation, you need to take advanced measures.
Firstly, we suggest disconnecting the power supply. Next, inspect the motor wire harness and speed sensor wires thoroughly for breakages.
Once you find the breakage, you’ll need to splice the ends together for them to work.
Alternatively, you can also install a brand-new set of wires. If you want to know more, you must consult professionals on how to repair an LG washing machine.
Failure of the Control Board
The control board is the motherboard of your washing machine. It gives your device the commands required to get the job done.
This circuit board consists of micromodules, each serving its own purpose. Based on your input, the control board coordinates the washer parts to run the cleaning cycles.
However, the control board may fail for several reasons. One of the biggest reasons is that it got shorted.
Shorting happens when a massive flow of power passes through your control board.
Such an enormous amount of electrical energy can fry your control board, rendering it useless.
It’s common when your house doesn’t have grounding and gets hit by lightning. Exposure to excessive heat and moisture levels can also lead to heavier wear and tear.
How to Repair?
When your control board is fried, different machine functions start to fail. To fix this, we recommend replacing the entire control board with a new one.
To do so, disconnect the power, remove the top access panel, and remove the pressure switch. Following this, disconnect the electrical connector from the control board and remove the housing panel.
Simply replace the control board and reassemble the entire component to solve your problem.
However, if you want to fix your existing board, we recommend checking out our advanced how-to videos.
Worn Out Motor Rotor Assembly
The worn-out motor rotor is a more accessible part to fix. When learning how to repair LG washing machine spinner, we recommend everyone understands how to fix the motor rotor assembly.
It’s one of the most common reasons why your spinner is not working. This component in your washing machine keeps the tub spinning. Thus, it is prone to high levels of wear and tear.
How to Repair?
Replacing this component is simple and easy. Disconnect the machine and remove the rear access panel. Once you do this, you’ll be able to see the assembly. Remove the bolt holding this assembly in place and replace the motor rotor. Reattach the bolt, and you’re done. We suggest turning the rotor by hand once to check whether it’s properly spinning the tub.
How to Open LG Washing Machine Spinner?
Since you’re aware of different problems and issues with the spinner, knowing how to open an LG washing machine spinner is essential.
The steps for this are pretty straightforward. Following these simple steps can help you repair your washing machine like a pro:
- Disconnect the power supply to your washing machine to prevent the chances of electrocution.
- Open the top lid and unscrew the housing that holds the tub in place.
- Unscrew the central holding screw at the bottom of the tub and take the tub out of the washing machine’s body.
- Following that, tilt the machine forwards gently and lay it down on its front.
- Remove the rear panel of your washing machine.
- Now you can get full access to the spinner and all its related components.
Once you’re done opening the LG washing machine spinner, you can easily find the issue and repair it!
Thus, now you know the basics of how to repair an LG washing machine spinner and how to open an LG washing machine spinner.
But, if your issue is unresolved even after taking the suggested measures, we recommend reaching out to authorized professional repair services.
These businesses have expertise in conducting LG washing machine repairs and can help you promptly.