Like any other appliance and technological device, an air conditioner’s quality will decline due to wear and tear over time.
If you are using a cooler used for the whole house or a single room, they should not work harder than they should.
Constant upkeep of your AC will go a long way, generating lesser costs for repair and electrical bills. And the best advantage of a well-kept cooler is that you will have fewer breakdowns, resulting in a longer lifespan.
What to Know About Air Conditioner Maintenance
There are many helpful ways to maintain the condition of your AC.
However, if you require technical assessments and repairs and complex services, it would be best to leave these tasks out for the professionals like Dowd Heat & Air – Airconditioning Services.
With proper training and licensed professionals, they can turn your cooler around and make it brand new once again.
Suppose you don’t mind executing some of the maintenance tips disclosed in this article, keep in mind that you should always observe safety precautions.
Ensure that the power in your electrical box is turned off before you touch and perform any of these maintenance procedures.
Maintenance Tips For Air Conditioner
Take advantage of a cool environment indoor all seasons of the year through these maintenance tips for air conditioner:
1. Check the Thermostat
One of the most basic tasks for air conditioner maintenance is to check and examine the thermostat. You have to observe whether it is working correctly and is capable of cooling your home at the right temperature.
One common problem is when the thermostat is suffering from low-voltage. Troubleshoot it before it causes more damages to your AC.
If you see that your thermostat has problems, you will need to inspect if it can be repaired or if you should go for an air conditioner replacement once and for all.
You can also opt for a thermostat upgrade, from an old mechanical one to a smart and programmable model, in which you can set the temperature higher when no one is home and make it lower some minutes before people are going back to your home.
This way, you’ll have a readily cooled environment when you finally arrive home. This will not only be convenient but will maximize savings and reduce energy consumption.
2. Clean or Replace Air Filters
Another basic yet crucial way to maintain your air conditioner is to clean its air filters. It is highly recommended to have it washed and scrubbed monthly, especially during the summer and winter seasons.
If you don’t use reusable ones, then it would be best to replace them regularly completely.
Using high-quality ones would be a smarter investment since it can filter out bacteria and clouds of dust way better than inexpensive filters.
Depending on the air conditioner type and model, the location of air filters varies. It could be found behind the air grille on a wall or ceiling, inside the blower compartment, or in a slot within your furnace.
You’ll notice that air filters have already accumulated so many specks of dust, dirt, and allergen particles when airflow is already decreased and the cooling capacity is already feeble.
It will have to exert more energy than it should, taking a toll on its quality.
This, in turn, will affect the air quality inside your home since clouds of dust accumulated will also be secreted from the cooler, causing allergies and asthma for everyone.
3. Clear Out the Debris From the Unit
There are possibilities of leaves, dirt, soil, and grass clippings getting all blocked outside your AC. This will also impact the system capacity and hinders airflow.
The best way to avoid this is to ensure that there are no tall shrubs or plants that can keep your air conditioner from having a smooth airflow.
Make sure that the place where it is installed is clear from any cloggers.
It’s essential to clean not only the internal parts of your cooler but also its external case. Check whether there is debris that is blocking its air passage.
Use a garden hose to wash debris carefully. You may start at the top and work down at a 45-degree angle. This will enable all the dirt to clear from above to the bottom.
Try to avoid using high-pressure water hoses as they can damage the fins of your AC coil.
4. Check the Wiring Connections
Although not everyone may be comfortable tackling an air conditioner’s electrical wiring connections, it’s still imperative to have them checked up at least once a year.
First off, make sure that the condenser unit is not working, remove the access panel, and check if there are any overheating signs.
This is quite dangerous not only for causing damages to the device but also for accidental fire in the worst-case scenario.
Check whether there is melted insulation on wires or any abnormal-looking wires. Have them changed right away if you see anything.
To ensure everything is running smoothly in its technical sense, you can hire an electrician to check all of its electrical connections.
They usually have an electrical test meter to see if the unit’s capacitors are at par with the standards. Remember that if necessary repairs are required, reach out to your local air conditioning experts to check your unit.
5. Straighten the Coil Fins
The fins of an air conditioner are usually made out of aluminum steel. These are essential parts of your evaporator and condenser coils, and they are easy to bend.
Once they are bent, it will block airflow and affect the cooling capacity of the aircon. If your coil fins don’t need changing, you can simply straighten them out.
Routinized checkups are necessary to prolong the longevity of your air conditioner. Stay comfortable all year round, especially during the hottest days of summer.
By ensuring that your cooler is working correctly, you can save energy and contribute to the environment. As for financial aspects, you can save money on your electrical bills.
Having them well-maintained will also prevent you from paying for more significant expenses when some parts are already too damaged to fix.